The New CableTool provides contractors, electricians, low voltage installers, or anyone involved in the installation or maintenance of metallic cables with the capibility to quickly find faults in cables up to a distance of 2500 feet. Simply select the appropriate cable type from the pre-stored library, attach the leads to two conductors of the cable and with a single press of a button the length of the cable or distance to an open or short is displayed. Voltage on the wires is continuously measured and displayed to warn of a potentially unsafe condition. The CableTool will also inject a tone onto the conductor for tracing cables installed in walls and ceilings with a standard tone probe. The universal banana jack test lead connectors allow for a wide range of adapters for any connector type. The affordable CableTool is an essential tool for anyone in the cabling industry.
Technical Specifications:
Physical Characteristics
Dimensions: 7.0 in. x 3.2 in. x 1.4 in. 178 mm x 81 mm x 36 mm
Weight: 8.7 ounces (w/batteries) 247 grams
Length
Accuracy: +/-2% plus +/-2 ft. (with correct NVP)Resolution: 1 foot or 0.2 meters Maximum: 2500 feet Minimum: 0 feet
Power Supply
Four AA alkaline batteries (Included)
Voltage
(True RMS Responding)
Range: 0-250V (AC or DC) Accuracy: +/-3% plus 1V
Environment
Operating Temperature: 0° to 50° C
Storage Temperature: -10° to 55° C
Tracing Tone
Frequencies: 575Hz, 997Hz 1.0KHz, 7.82KHz
Patterns: Four
Display
Graphical - 122 x 32 pixels |